Sensors UK Home What's New PDF Data Sheets Quality Standards Our Clients Contact Us
 

Products

Hand Held Tachometers

CT/DT/PT Series

Features
Optical Tachometer - Model PT231 - Specification

Contact Tachometer - Model CT20 - Specification
Dual Optical/Contact Tachometer - Model DT2236 - Specification

 

CT/DT/PT Series

Hand Held Instruments - CT/DT/PT Series

FEATURES

Through our latest hand held tachometers, models CT230, PT231 and DT2236, we offer a range of compact, economical hand held instruments capable of coping with virtually every type of speed measuring problem likely to be encountered.

These new instruments employ an exclusive single chip micro-controller LSI circuit with crystal time base. This results in a wide speed measuring range from 5 to 99,999 r.p.m., to a high degree of accuracy. The new refined housing is constructed from light durable ABS plastic giving maintenance free operation for many years.

All units are supplied complete with accessories, batteries, operating instructions, carry case with handle and are ready for immediate use.

Return to top of page

SPECIFICATION

Optical Tachometer - Model PT231
Contact Tachometer - Model CT230
Dual Optical/Contact Tachometer - Model DT2236

OPTICAL TACHOMETER - MODEL PT231
Display 5 digits, 7.6mm LCD
Test Range 5 to 100,000 RPM (one reflecting mark)
Resolution 1 RPM (less than 10,000 RPM), 10 RPM (over 10,000 RPM)
Accuracy ±1 RPM (5 to 5000 RPM),+ 0.05% (RPM) (over 5000 RPM)
Sampling Time 1 sec (over (60 RPM)
Detecting Distance Up to 60cm
Time Base Quartz crystal controlled
Circuit Exclusive one chip microcontroller LSI circuit
Battery 4 x 1.5 AA size. Alkaline
Case The case is made of durable and light ABS plastic
Operating Temp. 0-50°C (32 122°F)
Size 190 X 72 x 37mm
Weight 250g including battery
Memory The last reading taken is automatically latched in memory for 5 minutes after releasing the MEASURE BUTTON. This reading may be displayed by pressing the MEMORY RECALL BUTTON
Operation Apply a reflective mark to the object being measured. Press the MEASURE BUTTON and align the visible light beam with the applied target. Verify that the MONITOR INDICATOR shows each time the target passes through the light beam. Release the MEASURE BUTTON when the reading stabilises (approx. 2 seconds).
Accessories Carrying case. Reflective tape. Instruction manual.
Option Remote optical probe with 1m cable, model RP2

Return to top of page

CONTACT TACHOMETER - MODEL CT230
Display 5 digits, 7.6mm LCD
Function RPM, m/min. (surface speed), ft/min.( surface speed)
Test Range RPM - 0.5 to 9999 RPM
m/ min. - 0.05 m/ min. to 999.9 m/ min.
ft/ min. - 0.2 ft./ min. to 3280 ft/ min.
Resolution ± 0.1 RPM (0.5 to 999.9 RPM)., 1 RPM (over 1000 RPM)
Accuracy ±1 RPM (0.5 to 500.0 RPM), ± 1 RPM (over 1000 to 5000 RPM),± 0.05% (over 5000 RPM)
Sampling Time 1 sec (over (6 RPM)
Time Base Quartz crystal controlled
Circuit Exclusive one chip micro controller LSI circuit
Battery 4 x 1.5 AA size. Alkaline
Case The case is made of durable and light ABS plastic
Operating Temp. 0-50°C (32 122°F)
Size 208 X 72 x 37mm
Weight 260g including battery
Memory The last reading taken is automatically latched in memory when the MEASURE BUTTON is released. This reading may be displayed simply by pressing the MEMORY RECALL BUTTON
Operation RPM measurement:
Press the MEASURE BUTTON and lightly press the rotating cone to make contact with the rotating target. Release the MEASURE BUTTON when the reading stabilises (approx. 2 seconds)
Surface speed measurement:
Select the function SWITCH "mm/min" or "ft/min", you can then use this tachometer to measure the rate of surface speed simply by attaching the surface speed test wheel.
Accessories RPM adapters (1 male 1 Female).
Surface speed test wheel.
Carrying case.

 Return to top of page 

 

 

DUAL OPTICAL / CONTACT TACHOMETER - MODEL DT2236
General This unique instrument combines all the features of the PT231 and CT230 into one unit. Please refer above for specifications.

  Return to top of page

Hand held optical and contact tachometers for the measurement of rotational and linear speed